LF section adopts a 10inch high power Neodynium woofer unit. It is reflex loaded to extend the LF output to below the natural cut-off point of the horn. The design of acoustic construction marries the high efficiency of horn together with extended LF response of reflex enclosure.
MF section utilises a 6.5” midrange speaker unit with 2”voice coil. Horn loading structure offers sensitivity 106 dB/1W/1m. In front of the midrange speaker, there is precise phase circle which is adjustable, which reduces distorn obviously and rights up the top frequency point to reach 2.6KHz, and to reach 100 degree of horizontal coverage.
HF section utilises 2x2” Titanium diaphragm neodymium tweeter.Exact-equal way of horn loading, could transfer the high frequency spheroidal wave to equal phase plane wave, so to reduce abviously interferometer effect of HF, to get much more clear sound. With such high sensitivity 109dB/1W/1m and such high SPL 136 dB peak, DLA-310 could meet any dynamic range requirement of large performances.
There is a 3 channels class D power amplifier module built in the cabinet to drive the speakers. It is with high quality DSP to set EQ, phase, delay, crossover, limit, gain, mute, ect.
There is precise aluminium alloy hoisting system on the cabinet of DLA-310 ACTIVE. The joint-bar between box and box could be adjusted from 0°~8°, so that it could meet installation reuquirements from different events.
Specification
Model
DLA-310 ACTIVE
Type
10" three way active line array speaker
Drivers
LF: 1x10" neodnium speaker, 63mm voice coil
MF: 1x 6.5" speaker, 50mm voice coil;
HF: 2 x 2"titanium diaphragm neodynium driver; 44mm voice
coil; horn
Frequency Range
60Hz-19KHz(-3dB)
Power handling capacity
HF: 120W RMS, 480W Peak
MF: 150W RMS,600W Peak
LF: 250W RMS,1000W Peak
Sensitivity
HF: 109dB/1W/1m
MF: 106dB/1W/1m
LF: 102dB/1W/1m
MaximumSPL
HF:130dB Continue,136dB Peak
MF: 128dB Continue,134dB Peak
LF: 126dB Continue,132dB Peak
Rated lmpedance
HF: 16Ω
MF: 16Ω
LF: 16Ω
Coverage(H x V)
110 x 10 degree
Fittings
proprietary fitting system
Construction
18mm birch plywood box
Aluminum alloy hoisting;
water/dust proof treating;
Dimensions
818mm x 306mm x 456mm(WxHxD)
Net Weight
39Kg
Class D power amplifier module spec
Type
3 channels class D switch power amplifier
Output power
400W+400W+900W/8Ω
Input impedance
>20KΩ/>10KΩ
Frequency Range
20Hz-34KHz
(+0/-0.3dB,1W/8Ω)
crosstalk
>70dB (1 kHz)
THD
<0.01% (4Ω/kHz%)
S/N
>112dB
Damping factor
500
DSP with Screen
High quality DSP processor, 48kHz sampling rate of
frequency;High quality AD/DA
Channel mixing as need, with EQ, phase, delay, crossover,
limit, gain, mute
15ms delay each channel,7 EQ each input, 6 EQ each
output,running PEQ,High Sheif,Low Sheif EQ
3 filter:
Butterworth,Bessel,Linkwitz-Riley,12dB,18dB,24dB,48dB adjustable,frequency
1/36 Oct
limiter,threshold,release time all adjustable
showing working temperature on screen
Protection way
Boot AC soft start automatic protection、Over current automatic
tracking soft protection
Clipping voltage limit, load short circuit/overheat/DC output
off load,
shutdown protection, power on time delay
Connectors
XLR Female for input, XLR Male for output;
XLR Female/Male Rs485 for DSP linking
USB for computer controling
Contact: Frank
Phone: 86-158 8929 7858
Tel: 0755-89236016
Email: info@badoosound.com
Add: 1#, Xinjia Industry Zone, Jinlong Rd. Shenzhen. Wechat. Whatsapp: 86-158 8929 7858