Digital Power Amp with DSP+DANTE

DN-41000

4.3inch Touch Screen
Built-in DSP
4x1000 Watts/8Ω, 4x1500 Watts/4Ω
with AES and Dante
Product description: Intelligent DSP touch screen with AES and Dante interface power amplifier
INQUIRY

Features

4.3 inch touch screen
Support dual backup debugging function for buttons and touch screen.
Supports TCP, UDP, USB, RS232, RS485 control.
Support temperature, power, voltage, and current monitoring for each channel.
Supports 4 in 4 out DSP processors.
The signal source supports analog signal input, sine wave signal input, pink noise input, white noise input, Dante digital audio signal input (optional module), and AES digital audio signal input.
Input sensitivity: 0dB, 6dB, 12dB optional.
Input gain: -60-+15dB optional.
Input channel supports phase selection.
Input channel supports mute function.
The input channel supports adjustable noise gates.
The input channel supports 31 adjustable PEQ segments, supports BYPASS, supports high and low pass filters, and supports copy paste reset function.
Input channel supports adjustable delay.
The input and output channels support routing options, allowing for arbitrary channel input and multi-channel output.
The input channel can be randomly dispatched to the output of two FIR filters.
The output channel can be randomly dispatched to two FIR filter inputs.
The output channel supports 10 adjustable PEQ segments, supports BYPASS, supports high and low pass filters, and supports copy paste reset function.
Output channel supports adjustable delay.
The output channel supports adjustable compressors.
Output channel supports adjustable limiter.
Output gain: -60-+15dB optional.
Supports 80 scene save modes.
Supports three languages: Simplified Chinese, Traditional Chinese, and English.

Dante parameters

Supports network audio transmission, transmitting 1024 bidirectional channels simultaneously on a gigabit network switching system.
The minimum transmission delay is 83.3us.
The protocol supports two audio sampling rates, 48KHz and 96KHz.
Protocol sampling rate supports up to 192KHz.
The digital network audio card is configured with dual standard network interfaces, fully supporting various long-distance transmission applications of network audio, and has network cascade switching and hot backup functions.
Remote on-off module (optional).
The device supports TCP/UDP protocol network remote switch on/off.
Support for computer/tablet/mobile software management.
Centralized control of single and multiple device grouping can be achieved through computers.
Multiple device delay on/off functions can be achieved through computers, with adjustable delay time.
The device name and IP address can be changed through a computer.
Support for central control protocol control.
Supports serial RS485 access.
Supports serial RS232 access.